May 05, 2024  
2022-2023 Academic Catalog 
    
Catalog Navigation
  Catalog Home
  Academic Programs
  Degree and Certificate Requirements
  Disclaimer
  Accreditation
  Academic Calendar
  Message from the President
  Mission, Vision and Values
  Strategic Goals and Objectives
  Policies
  Admission and Registration
  Financial Information
  Student Life
  Student Services
  Transfer and Career Curricula and Academic Assessment
  Tuition and Fees
  Auxiliary Education Services
  Course Descriptions
  Board of Trustees and College Personnel
  Directory and Office Locations by Campus
  My Favorites
HELP
2022-2023 Academic Catalog [ARCHIVED CATALOG]

Course Descriptions

At North Arkansas College all courses carry identifying department prefixes and numbers that designate the level of the course, whether it is a part of a sequence or a one-semester course.

The numbering system aids students in planning programs. The digits in a course number also indicate the level of the course and whether it will carry college credit. Explanation of that system is as follows:

Digits from Level/Credit Explanation
0001-0999 College Preparatory classes that do not count toward associate degree requirements nor are they intended for transfer.
1000-1999 Freshmen level courses designed for the associate degree at North Arkansas College or for transfer to other institutions of higher education.
2000-2899 Advanced or sophomore level courses required in the associate degree program at North Arkansas College or for transfer to institutions of higher education.
2900-2999 Special project courses, which may carry 1-5 hours credit which may or may not transfer to other institutions.

The college reserves the right to cancel courses each semester for which adequate enrollment cannot be maintained.

The last digit of each four-digit number indicates the number of credit hours for the course.

Courses are alphabetized according to their prefix, not department.

In order for pre-requisite courses to be considered complete, a “C” or better must be obtained.
 

Radiologic Technology
  

  • RADT 1242 - Clinical Practice II

    Credits: 2
    This course is a continuation of RADT 1162 - Clinical Practice I . The student will continue to perform routine radiographic procedures with direct supervision of a Registered Technologist. Clinical 16 hours per week. Corequisite(s): RADT 1184 , RADT 1203 , and RADT 1232 .
  

  • RADT 1262 - Clinical Practice III

    Credits: 2
    This course is a continuation of RADT 1242 - Clinical Practice II . The student will continue to perform routine radiographic procedures with direct supervision of a Registered Technologist. Clinical 32 hours per week. Prerequisite(s): RADT 1242  
  

  • RADT 2112 - Clinical Practice IV

    Credits: 2
    The student will continue to perform routine radiographic procedures with direct supervision of a Registered Technologist. Clinical 32 hours per week. Prerequisite(s): RADT 1262  
  

  • RADT 2123 - Radiation Protection

    Credits: 3
    This course studies the effects of human exposure to radiation with emphasis on diagnostic x-ray. It includes patient and technologist exposure, the concepts of maximum permissible dose, shielding, and methods of x-ray detection and measurement. Lecture 3 hours per week. Prerequisite(s): RADT 1184  
  

  • RADT 2143 - Special Procedures

    Credits: 3
    This course presents specialized radiographic equipment, procedures and the use of contrast media that includes fluoroscopy, tomography, mobile radiography, angiography, and mammography. Lecture 3 hours per week. Corequisite(s): RADT 2123 , RADT 2173 , and RADT 2193  
  

  • RADT 2173 - Radiographic Pathology

    Credits: 3
    This course studies basic disease processes as they relate to radiographic procedures. Lecture 3 hours per week. Corequisite(s): RADT 2123 , RADT 2143 , and RADT 2193  
  

  • RADT 2193 - Clinical Practice V

    Credits: 3
    Clinical Practice V is a continuation of RADT 2112 - Clinical Practice IV . Students will increase their proficiency in routine radiographic procedures and include mobile radiography, special procedures, and trauma with direct supervision of a Registered Technologist. Clinical 24 hours per week. Prerequisite(s): RADT 2123 , RADT 2143 , and RADT 2173  
  

  • RADT 2203 - Advanced Imaging Modalities

    Credits: 3
    This course studies highly specialized imaging modalities including CT, MRI, ultrasound, nuclear medicine, and oncology along with cross-sectional anatomy. Lecture 3 hours per week. Prerequisite(s): RADT 2143  
  

  • RADT 2222 - Radiologic Evaluation

    Credits: 2
    This course consists of analyses of radiographic images and quality that include positioning, technique, and patient shielding. Lecture 2 hours per week. Corequisite(s): RADT 2203 , RADT 2253 , and RADT 2262  
  

  • RADT 2253 - Clinical Practice VI

    Credits: 3
    This is a continuation of RADT 2193 - Clinical Practice V . Students finalize clinical proficiency and include CT, MRI, ultrasound, nuclear medicine, and oncology with direct supervision of a Registered Technologist. Clinical 24 hours per week. Corequisite(s): RADT 2203 , RADT 2222 , and RADT 2262  
  

  • RADT 2262 - Seminar in Radiologic Technology

    Credits: 2
    This course provides additional study in the field of Radiologic Technology to enhance the employability of the student and registry exam success. Lecture 2 hours per week. Corequisite(s): RADT 2203 , RADT 2222 , and RADT 2253 .

Sociology
  

  • SOC 2013 - Introduction to Sociology

    Credits: 3
    This course studies the major physical, cultural, and psychological factors in the origin, growth, structure, and functioning of group life. Broad subdivisions to be emphasized include the scientific approach to society, culture, human nature and socialization, human organization, collective behavior, and social institutions. An honors section is available. Lecture 3 hours per week. (ACTS Department/Number/Title - SOCI 1013 Introduction to Sociology)
  

  • SOC 2203 - Social Problems

    Credits: 3
    This course is a sociological analysis of current social problems in the United States, including family and community disorganization, delinquency and crime, mental illness, and intergroup relations. Lecture 3 hours per week. Prerequisite(s): SOC 2013  with a grade of “C” or higher or permission of instructor. (ACTS Department/Number/Title - SOCI 2013 Social Problems)

Special Topic
  

  • SPTC 2791 - Special Topic

    Credits: 1
    This course will provide for the study of topics of current interest in areas of specific discipline. Lecture 1 hour per week.
  

  • SPTC 2792 - Special Topic

    Credits: 2
    This course will provide for the study of topics of current interest in areas of specific discipline. Lecture 2 hours per week.
  

  • SPTC 2793 - Special Topic

    Credits: 3
    This course will provide for the study of topics of current interest in areas of specific discipline. Lecture 3 hours per week.

Speech
  

  • SPCH 2303 - Public Speaking

    Credits: 3
    Public Speaking assists students through an integrated study of theory and practice to be more competent in oral communications situations. Students study and practice skills in a variety of oral communications styles, including interpersonal, small group, and individual speech presentations. Lecture 3 hours per week. ACTS/Department/Title Number SPCH 1003 Introduction to Oral Communication

Surgical Technology
  
  
  
  
  
  

  • SUR 1121 - Lab Practicum II

    Credits: 1
    This course emphasizes the application of advanced principles and patient care, case preparation, and procedures in a non-patient contact environment. Laboratory 2 hours per week for 16 weeks.
  
  

  • SUR 1133 - Surgical Procedures II

    Credits: 3
    This course explores the areas of orthopedic surgery, genitourinary surgery, ophthalmic surgery, and ear, nose, and throat surgery. It emphasizes patient care, surgical anatomy, supplies and equipment needed, sequence of procedures, pathophysiology, diagnostic tests, preoperative and postoperative care, and complications of surgical procedures. Lecture 3 hours per week. Prerequisite(s): SUR 1012 , SUR 1101 , SUR 1102 , SUR 1103 , SUR 1112 , SUR 1123 , and SUR 1213 .
  

  • SUR 1143 - Advanced Surgical Procedures

    Credits: 3
    This course emphasizes the specialty areas of plastic and reconstructive surgery, thoracic, peripheral and cardiovascular surgery and neurosurgery. Lecture 3 hours per week. Prerequisite(s): SUR 1133  and SUR 1213  
  
  

  • SUR 1214 - Clinical Practicum II

    Credits: 4
    This course is a continuation of SUR 1213  with a focus on moderately complex surgical cases. An increased level of proficiency is achieved in all areas of the operating room. Clinical hours 24 per week for 8 weeks.  Prerequisite(s): SUR 1012 , SUR 1101 , SUR 1102 , SUR 1103 , SUR 1112 , SUR 1123 , and SUR 1213  
  

  • SUR 1224 - Clinical Practicum III

    Credits: 4
    This course is a continuation of clinical coursework in all subspecialty areas of the operating room at an advanced level. Clinical hours 24 per week for 8 weeks.  Prerequisite(s): SUR 1133  and SUR 1214  
  

  • SUR 2103 - Surgical Nursing

    Credits: 3
    This course provides fundamental principles and skills for nurses desiring to work in the surgical environment. It includes surgical asepsis, basic surgical nursing skills, surgical supplies, equipment and instrumentation, safety, and patient care responsibilities. Lecture 2 hours per week, Laboratory 2 hours per week.  Prerequisite(s): Enrollment in or completion of an accredited registered nursing program.

Technical Studies
  

  • TECH 1003 - Introduction to Craft Skills

    Credits: 3
    This course, in conjunction with related technical training, is designed to prepare students for entry level positions in construction and other industry related fields. Course content includes the following: Safety, Mathematics, Introduction to Hand and Power Tools, Blueprints and symbols, Basic Communication and Employability Skills and Material Handling.  Practical application techniques are demonstrated throughout the course in the form of Performance Tasks as required by NCCER. Students will complete the NCCER Core Curriculum and be issued an NCCER Credential and Wallet Card upon successful completion of this course. Lecture 3 hours per week.
  

  • TECH 1013 - Technical Math

    Credits: 3
    This course provides a comprehensive review of basic mathematics that students will apply in their Certificate or AAS programs. The course content is individualized for each student and will include fractions, decimals, percentages, measurement, metric system, formula manipulation, computer familiarization, and calculator use. Lecture 3 hours per week. (Formerly MAT 1001)
  

  • TECH 1021 - Industrial Safety

    Credits: 1
    This course provides students with the basic safety knowledge required in today’s industrial workplace. Topics covered include accident reduction, safety training, safety involvement, safety inspections, accident investigations, industrial hygiene, ergonomics, machine safeguarding, tool safety, materials-handling safety, electrical and fire safety, hazard communication. Successful students will receive an industry-recognized certification as appropriate for their program of study. Lecture 1 hour per week. 
  

  • TECH 1022 - Small Engine and Turf Equipment

    Credits: 2
    This course provides an introduction to Principles of operation, adjustments, maintenance, and troubleshooting of small air-cooled power units, including various engine systems, service and maintenance of turf equipment and machinery. Lecture 1 hour and lab 2 hours per week.
  

  • TECH 1023 - Industrial Fundamentals

    Credits: 3
    This course is a study of basic industrial skills required in manufacturing environments and allows the student to attain credentials in the NCCER system.  The course introduces students to manufacturing safety, math, tools, and blueprints used in industrial environments.  Workplace communication and employability skills are covered to prepare students for successful entry into the workplace. 
  

  • TECH 1024 - Introduction to Facilities Maintenance

    Credits: 4
    This course is an introduction to general facilities maintenance. Topics covered include: Electrical troubleshooting and repair, plumbing and plumbing fixture repair/replacement, window repair/replacement, doors and door hardware repair/replacement, drywall repair and refinishing, exterior and interior painting and finishing techniques, HVAC Systems, work orders and record keeping.
  

  • TECH 1033 - Industrial Technologies

    Credits: 3
    This course provides an overview of industrial technologies used in the trades providing students with fundamental skills required for industry.  Students explore foundational concepts of industrial equipment and processes.  This course provides students with exposure to industrial technology and common practices used for safe operation of electrical and industrial equipment in the manufacturing field.
  

  • TECH 1044 - Foundations of Manufacturing

    Credits: 4
    This course introduces students to the safe operation of basic manufacturing machine tools to provide an exploratory experience in early stage manufacturing processes. Foundational level skills and experiences in manufacturing processes and systems will be developed along with an awareness of technological literacy for today’s advanced manufacturing operations.  
  

  • TECH 1102 - Technical Communications

    Credits: 2
    This course is designed to assist students in preparing to meet the expectations of the workplace. It introduces concepts in the areas of self-management, professional development, teamwork, problem solving, resume writing and interviewing techniques. Topics include how to communicate effectively through reading, writing, and speaking. In addition, students will engage in practice of soft skills necessary to be successful in the employment setting. This course is offered for technical programs and is not designed to be a transfer course. Lecture 2 hours per week.
  

  • TECH 1203 - Introduction to Computer Aided Design

    Credits: 3
    This course introduces the student to modern CAD software used to create technical drawings of complex parts and assemblies. Design process, technical sketching, drawing, measurement and statistics, modeling skills, geometric design and reverse engineering techniques are elements covered throughout this course. This course utilizes both 2-D and 3-D CAD software commonly used in construction and manufacturing applications. Lecture 3 hours per week.
  

  • TECH 1233 - Engineering Graphics

    Credits: 3
    This course introduces design fundamentals, including orthographic and isometric projections, sections, auxiliary views, accepted dimensioning practices, and rapid sketching techniques. It also includes a survey of various industrial shop-floor and in-filed sketching practices required for quick change design requirements in today’s competitive manufacturing environment. Lecture 3 hours per week.

Truck Driving
  

  • TTD 1002 - CDL Training

    Credits: 2
    This course prepares students for successful completion of all requirements for an Arkansas Class A Commercial Driving License (CDL), including the written test, pre-trip inspection, and off-road skills test. The course also includes training in all non-driving activities required by the trucking industry. This is a 5-week course. Lecture 2 hours and laboratory 1 hour per week.
  

  • TTD 1103 - CDL Refresher Course

    Credits: 3
    TTD 1103 provides a refresher course for experienced Truck Drivers who need to obtain or renew a Class A Commercial Driver’s License. Lecture 3 hours per week. Prerequisite(s): Must be an experienced semi-tractor trailer driver with at least one-year experience. Students must have a temporary CDL permit as well as a current Department of Transportation physical.
  

  • TTD 1104 - Tractor Trailer Driving

    Credits: 4
    This course covers orientation of the tractor-trailer and operation of the trucking industry. It emphasizes safety, basic operation, advanced operation procedures, vehicle maintenance, and nonvehicle activities. Field exercises and road trips provide practical application. This is a 5-week course; lecture 3 hours and laboratory 3 hours per week.
  

  • TTD 2010 - Truck Driving Internship

    Credits: 10
    This course provides students the opportunity to drive with a professional truck driver in order to gain experience in a supervised setting, make trucking industry contracts, and document driving experience as an aid to finding employment. Arrangements with employers will be documented using a Northark Cooperative Internship form. Ten credit hours will be granted after 400 clock hours of supervised driving experience. Corequisite(s): TTD 1104  

Welding
  

  • WLD 1104 - Welding I

    Credits: 4
    This course in electric arc welding provides students with knowledge of equipment, safety precautions, and shop practice. Students will make basic types of welds in most positions, and study welding nomenclature, design of joints, and electric classifications. Lecture 2 hours and laboratory 6 hours per week.
  

  • WLD 1184 - Welding Application and Procedures

    Credits: 4
    This course is designed for individuals enrolled in technical programs requiring a general knowledge of welding and cutting processes. This course is not designed to teach welding as a means of artistic expression. It will cover the fundamentals, safety precautions, and shop practices related to Gas Metal Arc Welding, Flux-Core Welding and Cutting Processes. Lecture 3 hours and laboratory 3 hours per week.
  

  • WLD 1204 - Welding II

    Credits: 4
    This course is an advanced Shielded Metal (electric) Arc Welding course. Students will perform advanced arc welding techniques using mild steel electrodes in the flat, horizontal, vertical, up, and overhead positions on structural plate. The course emphasizes identifying and analyzing defects in welding joints. Lecture 2 hours and laboratory 6 hours per week. Prerequisite(s): WLD 1104  
  

  • WLD 1304 - TIG Welding

    Credits: 4
    This course includes in-depth study and practice of the gas tungsten arc welding process. The student’s experience begins with the development of manipulative skills though Shielded Metal Arc Welding, then progresses to similar application with TIG Welds in the standard positions. The student will master joint designs on carbon steel, aluminum, and stainless steel. Lecture 2 hours and laboratory 6 hours per week. Prerequisite(s): WLD 1104  
  

  • WLD 1403 - Collision Repair Welding

    Credits: 3
    This course covers the Gas Metal Arc Welding (GMAW), also known as Metal Inert Gas (MIG), process of repairing and joining high strength steel and other steels using manufacturers’ specifications/procedures. Additionally, the Gas Metal Arc Welding process of repairing and joining aluminum materials is covered. Lecture 1 hour and laboratory 5 hours per week.
  

  • WLD 1404 - MIG Welding

    Credits: 4
    This course includes in-depth study and practice of the gas metal arc welding process. The student will learn the principles of constant voltage power source and the mechanics and maintenance of the wire feeding system. Upon successful completion of the course, the student knows about and is able to practice the following: short circulating transfer on stainless and mild steel, globular transfer with flux cored wire on mild steel, and spray transfer mode used on aluminum. Lecture 2 hours and laboratory 6 hours per week. 
  

  • WLD 1453 - Welding Layout and Fabrication

    Credits: 3
    This course covers the theory and practice of layout and fitting of pipe and structural steel. Basic welding skills with arc, MIG and oxyacetylene are prerequisites. The student learns the process of fabricating structure from pipe and steel through a series of competency-based exercises. Lecture 2 hours and laboratory 3 hours per week. Prerequisite(s): WLD 1104  
  

  • WLD 2505 - Certification Welding

    Credits: 5
    This course teaches advanced techniques using low hydrogen electrodes to prepare students to pass the American Welding Society and American Society for Mechanical Engineers Structural Welding Test. Lecture 3 hours and laboratory 6 hours per week. Prerequisite(s): WLD 1104  and WLD 1204  
  

  • WLD 2605 - Pipe Welding

    Credits: 5
    This course develops skills used in the welding of both transmission pipeline and piping systems. It emphasizes the skills needed to meet the standards of the American Welding Society. Lecture 3 hours and laboratory 6 hours per week. Prerequisite(s): WLD 1204  
  

  • WLD 2705 - Advanced TIG Certification

    Credits: 5
    This course is a detailed study and practice of Tungsten Inert Gas (TIG) welding procedures used in industry. The student will learn advanced techniques that are applicable to the pipeline and tube welding job market. This course will develop skills necessary to pass the American Welding Society (AWS) test for structural pipe welding. Lecture 3 hours and laboratory 6 hours per week. Prerequisite(s): WLD 1304  
  

  • WLD 2805 - Flux Core Certification

    Credits: 5
    This course provides an in-depth study of advanced techniques in the (3G and 4G) uphill and overhead position. The training will prepare the student to pass the D1.1 American Welding Society (AWS) code. Lecture 3 hours and laboratory 6 hours per week. Pre/Co-requisites WLD 1404  
 

Page: 1 | 2 | 3 | 4 | 5